How do I install the driver for the StarTech Com USB-A to RS232 DB9 Serial Adapter Cable with COM Retention? (StarTech com DB9 Serial Adapter Cable User Guide)

Answer

manuals.plus

Feb 12, 2025 - 04:20 AM


To install the driver for the StarTech Com USB-A to RS232 DB9 Serial Adapter Cable with COM Retention, please follow these steps:

1. Navigate to the website www.startech.com/1P3FPC-USB-SERIAL.
2. Click on the Drivers/Downloads tab.
3. Download the Driver Package for your operating system.
4. For Windows:
   - Right-click the downloaded file and extract the contents using "Extract All".
   - Browse the Windows folder and run the Setup file.
   - Follow the on-screen instructions to complete the installation.
   - Connect the USB to Serial Adapter Cable to an available USB port.
5. For macOS:
   - Double-click the downloaded file.
   - Open the folder that matches your macOS Version and run the Setup file inside the folder.
   - Follow the on-screen instructions to complete the installation.
   - Connect the USB to Serial Adapter Cable to an available USB port.

To verify the driver installation:
- For Windows, navigate to the Device Manager, under Ports (COM & LPT), right-click Prolific USB-to-Serial Comm Port and click Properties. Confirm that the driver is installed and working as expected.
- For macOS, navigate to System Information, expand the Hardware section, and click USB. Confirm that Prolific USB-to-Serial Comm Port appears in the list.

For further assistance, you can refer to the manual or visit the StarTech.com support website for manuals, FAQs, videos, drivers, downloads, technical drawings, and more.