User Manual Q&AAnswer
Feb 12, 2025 - 03:56 AM
To mount the Cannon 1901200 Mini-Troll Manual Downrigger to your boat, follow these steps:
1. Transom Mount: If you are mounting the downrigger to the transom of your boat, you may need to use a wood block to ensure proper clamping. Depending on the width of the transom, a wood block can help distribute the clamping force and prevent any potential damage.
2. Gunwale Mount: If you are mounting the downrigger to the gunwale of your boat, it is recommended to use a wood block on the inside of the boat. This will help distribute the clamping force to a larger area and prevent any possible damage. Depending on the rail overhang, you may also need to use a wood block on the outside of the boat.
3. Spacer Block: Depending on your boat application, you may need to use the spacer block provided with the downrigger. To attach the spacer block to the main frame, slide the dovetail-shaped tab of the block into the matching recess in the frame. Make sure that the holes in the block face down.
Note: It is recommended to mount the Mini-Troll off the transom of your boat, if possible, so that the weight is being pulled directly behind the downrigger. Mounting the Mini-Troll on the gunwale is not recommended as lateral stress on the frame may cause cracking.
For more detailed instructions and illustrations, please refer to the user manual of the Cannon 1901200 Mini-Troll Manual Downrigger.
Add New Comment