Answer

Feb 12, 2025 - 03:40 AM
To install the COOPER Lighting Solutions IB50533821 Sure-Lites Apel Mini Emergency Light, you can follow the instructions provided in the instruction manual. Here is a step-by-step guide for wall mount installation:
1. Extend an unswitched 24-hour AC supply of the rated voltage to the junction box, leaving at least 8 inches of slack. Do not energize the circuit at this time.
2. Open the APELMINI by inserting a screwdriver into the two holes on the bottom of the unit, which will deflect the snap features and allow the unit to open.
3. Knock out the appropriate mounting hole pattern and wire pass hole on the backplate to match the junction box.
4. Install the backplate to the junction box using screws. Once the backplate is installed, the unit can be hung from the EZ-Hang snap features to increase ease of installation.
5. Connect the power supply and ground in accordance with local codes. Wire connections as follows: 277VAC line to the orange lead or 120V line to the black lead; neutral to the white lead. Cap any unused line lead.
6. Energize the AC supply. The Test Button will illuminate.
For conduit installation, the steps are similar, but you will need to attach conduit hubs to the appropriate conduit entry points on the backplate and remove the correct conduit cover knockout(s) for your desired configuration of conduit access.
Please note that installation and maintenance of this product should be performed by a qualified electrician in accordance with the applicable installation code. It is important to ensure that the power is OFF before starting installation or attempting any maintenance. For further troubleshooting or assistance, you can contact your local Cooper Lighting Solutions representative.
Add New Comment