How do I install the COMMSCOPE FGS-MJWR-C FiberGuide Junction Kit? (CommScope FGS-MJWR-C Junction Kit 2x2in Instruction Manual)

Answer

manuals.plus

Feb 12, 2025 - 03:33 AM


To install the COMMSCOPE FGS-MJWR-C FiberGuide Junction Kit, please follow the steps below:

1. Ensure that you have all the necessary tools and equipment for installation, including a screwdriver and appropriate mounting hardware.

2. Identify the location where you want to install the junction kit. It is recommended to choose a suitable location that allows for easy access and cable management.

3. Prepare the mounting surface by cleaning it and ensuring it is free from any debris or obstructions.

4. Take the FiberGuide Junction Kit and separate the joiner section from the rest of the components.

5. Align the joiner section with the existing FiberGuide raceway sections or other compatible components.

6. Snap the joiner section into place by firmly pressing it together with the existing sections. Ensure that it securely locks into position.

7. If necessary, use the provided mounting hardware to secure the junction kit to the mounting surface. Follow the guidelines provided in the installation manual for proper mounting.

8. Once the junction kit is securely installed, you can proceed with routing and managing the fiber cables within the FiberGuide system.

Please note that this answer is a general guideline based on the information provided in the manual. For specific installation instructions and any additional details, it is recommended to refer to the official instruction manual provided by COMMSCOPE or contact their customer support for further assistance.