User Manual Q&AAnswer
Feb 12, 2025 - 03:01 AM
To install the Interiors 1900 SN01W Russell Wall Light, please follow these steps:
1. Ensure that the mains supply is switched off before starting the installation. It is recommended to withdraw the fuse or switch off the circuit breaker at the distribution board for added safety.
2. Determine the desired position for the light fitting or remove any existing light fitting. Take note of the electrical connections and ensure there is a solid mounting surface, preferably a wooden joist or joist bridge, to support the weight of the light fitting.
3. Carefully prepare the mounting holes, taking care not to drill into any pipes or mains cables beneath the surface.
4. Securely fix the light fitting to the mounting surface using the screws and wall plugs provided. Please note that these fixings are suitable for "masonry" only, and if needed, additional fixings must be purchased separately.
5. Ensure that all electrical connections are tight and that no loose strands are left out of the terminal.
6. Connect the light fitting to a wall switch for safe isolation and control.
Please consult a qualified electrician if you have any doubts or concerns about the installation or use of this product.
Note: This answer is based on the information provided in the Interiors 1900 SN01W Russell Wall Light Instruction Manual.
Add New Comment