User Manual Q&AAnswer
Feb 12, 2025 - 02:35 AM
To turn on and pair the oraimo OEB-E108D True Wireless Earbuds with the charging case, follow these steps:
1. Remove the protective film from the earbuds.
2. Charge the earbuds by putting them back into the charging case and fully charging the case for 2 hours.
3. Open the lid of the charging case. The earbuds will automatically turn on and enter pairing mode for the first-time use.
4. Make sure the distance between the earbuds and your device is less than 1 meter/3.3 feet during the initial connection.
5. When turned on, the earbuds will automatically connect to the last connected device if available. If not, they will enter pairing mode.
6. If you want to clear the pairing list, press the reset button for 5 seconds with the lid opened.
7. If you encounter any abnormal condition, return the earbuds to the charging case with the lid closed for 10 seconds and then take them out again.
Note: The earbuds will automatically turn off when they are in the charging case and the lid is closed after being fully charged.
For more detailed instructions and information, please refer to the oraimo OEB-E108D True Wireless Earbuds with Charging Case User Guide.
Add New Comment