User Manual Q&AAnswer
Feb 12, 2025 - 02:00 AM
To set up the EASTCOLIGHT Galaxy Tracker 125 Smart Telescope, follow these steps:
1. Unpack the tripod from the box and spread the tripod legs so that the leg braces are fully extended and rest safely at the base of the tripod center post. Fasten all locks to hold the legs securely in place.
2. Slide the telescope bracket and adjust the holes.
3. Take out the finderscope from the box and remove the two knurled thumb screws from the telescope tube. Position the finderscope on the telescope tube so that the holes in the base of the bracket line up with the exposed holes in the telescope tube. Replace the two knurled thumb screws and fasten them securely.
4. Remove the lens caps from the eyepiece and the objective lens.
Add New Comment