User Manual Q&AAnswer
Feb 12, 2025 - 01:58 AM
To connect the TERADEK Prism Flex 4K HEVC Encoder and Decoder to your video source and monitor, follow these steps:
1. Encoder: Turn on your video source and connect the HDMI or SDI input (J) from your video source to the Prism Flex's input connector.
Decoder: Turn on your monitor and connect the HDMI or SDI output (K) from the Prism Flex to the monitor's input connector.
2. Attach the two Wi-Fi antennas to the RP-SMA connectors (C) on the Prism Flex.
3. Connect power to the Prism Flex using the included A/C adapter.
4. Turn the Power switch on the back (L) of the Prism Flex to the ON position.
By following these steps, you will be able to establish the necessary connections between the Prism Flex and your video source as well as your monitor.
Add New Comment