User Manual Q&AAnswer
Feb 12, 2025 - 01:32 AM
To assemble the TECMIX TMLHS820 215mm Electric Drywall Sander, follow these steps:
1. Unpack the device and check for completeness. Make sure all parts are present and undamaged.
2. Open the fixation (N) and insert the suction hose (P) into the fixation. Close the fixation to secure the hose.
3. Mount the grinding sheets by placing them centrally on the grinding plate (D) and screwing them tight using the provided xxxx and washer (F). The grinding sheet should be fixed in place with the Velcro fastener on the grinding plate.
4. If you want to connect the sander to a vacuum cleaner for dust extraction, loosen the fastening nut and connect the hose to the exit of the handle. The other end of the hose should be connected to the vacuum cleaner.
Once the sander is assembled, you can proceed to operate it following the instructions provided in the manual.
Note: It is important to read and understand the safety instructions and precautions outlined in the manual before using the TECMIX TMLHS820 215mm Electric Drywall Sander.
Add New Comment