User Manual Q&AAnswer
Feb 12, 2025 - 01:31 AM
To install the Niceboy ORBIS Windows and Door Smart Sensor, follow these steps:
1. Remove the protective film from the sticker on the sensor unit and place it on the sensor unit.
2. Remove the protective film from the sticker on the magnet unit and place it on the magnet unit.
3. Stick the sensor unit to the unmovable surface of the door or window.
4. Stick the magnet unit to the movable surface of the door or window, aligning it with the sensor unit.
5. Make sure the installation gap between the sensor unit and magnet unit is less than 15mm when the door or window is closed.
Please note that it is recommended to install the sensor unit on the unmovable surface and the magnet unit on the movable surface for optimal performance.
For more detailed instructions, please refer to the Niceboy ORBIS Windows and Door Smart Sensor User Manual.
Add New Comment