User Manual Q&AAnswer
Feb 12, 2025 - 01:12 AM
To assemble the Inspire MIRASOL Metal LED Floor Lamp, please follow these steps:
1. Before starting the assembly, make sure the power supply is deactivated. Remove the fuse or switch the fuse to OFF and secure it from reactivation.
2. Begin by unpacking all the components and ensuring that all parts are included.
3. Connect the adaptor to the lamp by inserting the plug into the socket located at the bottom of the lamp base.
4. Carefully attach the lampshade to the lamp by aligning the holes on the shade with the corresponding pegs on the lamp base. Gently push the shade down until it is securely in place.
5. Once the lampshade is attached, connect the power supply to the adaptor and plug it into a suitable electrical outlet.
6. After the lamp is assembled, make sure to rewind the wire 7 turns and ensure that the internal cable does not exceed 360 degrees after installation.
7. Finally, switch on the power supply and enjoy the illumination provided by the Inspire MIRASOL Metal LED Floor Lamp.
Please refer to the instruction manual for any additional information or safety precautions.
Add New Comment