User Manual Q&AAnswer
Feb 12, 2025 - 01:03 AM
To connect the Niceboy ORBIS Bridge Smart Sensor to your Wi-Fi network, follow these steps:
1. Plug the hub into a socket and ensure that the red and blue indicator lights turn on.
2. Make sure your mobile phone is connected to a 2.4 GHz Wi-Fi network and that Bluetooth is enabled.
3. Press and hold the reset button on the hub for 5 seconds until the blue indicator light starts flashing rapidly. If the blue light doesn't start flashing rapidly, press the reset button once and then hold it for 5 seconds.
4. Open the Niceboy ION app on your mobile phone and tap the "+" icon in the top right corner to enter the "Add Device" page.
5. The app should automatically detect the ORBIS Bridge. If it doesn't, select "Sensors" and then click on "Bridge". Confirm that you have reset the device and that it is blinking rapidly.
6. The app will start searching for the device. Once it is found, simply add it to the app.
By following these steps, you should be able to successfully connect the Niceboy ORBIS Bridge Smart Sensor to your Wi-Fi network.
Add New Comment