User Manual Q&AAnswer
Feb 11, 2025 - 11:57 PM
The installation steps for the Right Weigh PP-003-0061 Onboard Load Scale are outlined in the user manual. Here is a summary of the installation process:
1. Install Strain Sensor: Follow the steps in the included installation kit manual to install all strain sensors onto your vehicle.
2. Choose Location: Select a location for mounting the scale that is easily accessible and safe from potential damage. Avoid mounting the scale directly to the chassis or any other main beam unless approved by the vehicle manufacturer.
3. Install Connection Harness: Follow the steps in the included installation kit manual to install the connection harness.
4. Set Number of Connected Strain Sensors: Once the gauge is connected to power, it will automatically turn on and display "bAr -" on the screen. Set the gauge to the number of strain sensors connected to it using the UP arrow button.
5. Operating Modes: Each vehicle configuration requires a specific operating mode. Refer to the tables in the manual to find your vehicle configuration and set the gauge to the corresponding operating mode.
6. Sensor Check & Adjustment: After installing the scale and strain sensors, it is important to check and adjust the sensor values if necessary. Follow the steps in the manual to enter the diagnostics menu and adjust the strain sensors accordingly.
7. Calibration & Units: The load scale must be calibrated both empty and loaded to work properly. Follow the instructions in the manual to calibrate the scale for each axle group being monitored.
8. Set/Change PIN Code (Optional): If desired, you can set a security PIN code on the scale. Follow the instructions in the manual to set or change the PIN code.
9. Operate & Weigh: Follow the steps in the manual to properly weigh your vehicle using the load scale.
For more detailed instructions and information, please refer to the complete user manual provided with the Right Weigh PP-003-0061 Onboard Load Scale.
Add New Comment