User Manual Q&AAnswer
Feb 11, 2025 - 11:40 PM
To charge the KODAK PRINTOMATIC Digital Instant Print Camera, follow these steps:
1. Plug a micro USB cable (not included) into any wall adapter rated at 1 amp.
2. Connect the micro USB cable to the camera's micro USB port.
3. The battery LED indicator on the camera will turn red, indicating that the camera is charging.
4. Allow the camera to charge fully. It may take up to 2 hours to fully charge.
5. Once the battery is fully charged, the battery LED indicator will turn off.
Please note that using a computer or laptop to charge the camera is not recommended as it may significantly increase the charging time. Also, avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance.
It is important to use a micro USB cable and wall adapter rated for 1 amp to ensure proper charging. Using a different cable or adapter may not provide sufficient power and may result in slower charging or no charging at all.
For further assistance or troubleshooting, you can contact the customer service team at kodak@camarketing.com or 844-516-1539 (U.S.) or kodakintl@camarketing.com or +1-844-516-1540 (International).
Add New Comment