User Manual Q&AAnswer
Feb 11, 2025 - 11:14 PM
To connect the Monster MLB7-1065-RGB Smart RGB+IC LED Flow Light Strip to your Wi-Fi network, please follow these steps:
1. Make sure your cellphone or tablet is connected to the 2.4GHz Wi-Fi network that your LED Strip will be placed on.
2. Download the "MONSTER SMART" app from the App Store (for iPhone) or Google Play Store (for Android phones).
3. Open the "MONSTER SMART" app and create an account by following the on-screen instructions.
4. Connect the USB plug of the LED Strip to a powered 5V 2A USB wall adapter (not included). The light should turn on. If needed, press the multifunction button twice to turn on the light.
5. Press and hold the multifunction button for 5-6 seconds to enter pairing mode. The light will begin blinking when it has entered pairing mode and is ready to pair.
6. In the "MONSTER SMART" app, select the "+" in the upper right corner of the home screen to add a new device.
7. The app will detect the nearby Wi-Fi+BLE enabled device and ask if you would like to add it. Click "Go to add".
8. Confirm that the device is in pairing mode (LED is rapidly blinking). In the app, select the device and click the "+" button.
9. Confirm that the network displayed is your 2.4GHz Wi-Fi network, then enter your Wi-Fi password and click "Confirm".
10. Once complete, your device will be connected to the network. Confirm or change the settings for your device and then click "Done". Your device is now set up and ready to use.
If you are still having trouble connecting the LED light strip to your Wi-Fi network, make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network, enable Bluetooth, and allow location services on your device. If your Wi-Fi network is a mixed 2.4GHz/5GHz network, try using AP pairing mode. If you continue to experience difficulties, it is recommended to contact your Internet Service Provider for assistance with 2.4GHz network setup.
Add New Comment