User Manual Q&AAnswer
Feb 11, 2025 - 11:12 PM
To mount the Kramer WP-SW2-EN7 AV over IP Wall Plate Encoder, follow these steps:
1. Insert the device into the in-wall box, ensuring that you have connected the RS-232 and LAN/POE RJ-45 Connector cables and/or power beforehand.
2. Connect the parts as shown in the illustration provided in the manual.
3. Depending on the model, use any of the recommended standard 2 Gang in-wall junction boxes:
- US-D: 2 gang US electrical junction boxes.
- EU: 2 gangs in-wall junction box, with a cut-hole diameter of 2x68mm and depth that can fit in both the device and the connected cables (DIN 49073).
- UK: 2 gangs in-wall junction box (BS 4662), 135x75mm (W, H), and depth that can fit in both the device and the connected cables.
- EU/UK: 2 gangs on-wall junction box (use the recommended Kramer on-wall box available at www.kramerav.com/product/WP-SW2-EN7).
Please refer to the manual for detailed illustrations and instructions on mounting the WP-SW2-EN7 AV over IP Wall Plate Encoder.
Add New Comment