User Manual Q&AAnswer
Feb 11, 2025 - 11:02 PM
To install the Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Output Module, follow these steps:
1. Rotate the keyswitch on the terminal base clockwise to position 2.
2. Ensure that the Flexbus connector is pushed all the way to the left to connect with the neighboring terminal base/adapter.
3. Make sure the pins on the bottom of the module are straight.
4. Position the module with its alignment bar aligned with the groove on the terminal base.
5. Press firmly and evenly to seat the module in the terminal base unit. The module is seated when the latching mechanism is locked into the module.
For more detailed instructions and illustrations, please refer to the "Install Your Digital Input/Output Module" section in the Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Output Module Instruction Manual on page 5.
Note: It is important to read the entire manual and familiarize yourself with the installation, configuration, and operation instructions before installing, configuring, operating, or maintaining this product.
Add New Comment