User Manual Q&AAnswer
Feb 11, 2025 - 10:59 PM
To install the charcoal filters in the Zephyr ZRGE30BS 30 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood, follow these steps:
1. Place the charcoal filters to the back side of the baffle filters. The baffle filters are the metal filters that are already installed in the hood.
2. Secure the charcoal filters in place using rubber clips. These rubber clips should be provided with the hood. Attach the clips to the edges of the charcoal filters, ensuring they hold the filters securely.
3. Depending on the design of the filters, you may need to secure the top and bottom of the charcoal filters as well. This can be done using either rubber clips or magnets, which should also be provided with the hood.
4. Make sure the charcoal filters are properly aligned and securely attached to the baffle filters. This will ensure effective filtration of odors and grease.
For further assistance or clarification, refer to the installation instructions provided with the Zephyr ZRGE30BS 30 Inch Stainless Steel Convertible Chimney Style Wall Mount Hood. If you have any additional questions or concerns, you can contact Zephyr customer support at 1.888.880.8368.
Add New Comment