User Manual Q&AAnswer
Feb 11, 2025 - 10:39 PM
To change the cutter on the BOSCH GSC 18V-16 Cordless Cutter, follow these steps:
1. Remove the battery from the power tool before carrying out any work on the tool.
2. Loosen the fastening xxxx for the upper cutter using a suitable tool.
3. Remove the upper cutter from the power tool.
4. If necessary, loosen the set xxxx for the bottom cutter using a suitable tool.
5. Remove the bottom cutter from the power tool.
6. Turn or replace the cutters as needed. The upper and bottom cutters are identical and have four cutting edges each.
7. When installing the bottom cutter, ensure that it fits against the set xxxx .
8. Tighten the fastening xxxx for the upper cutter and the set xxxx for the bottom cutter with a torque of 3-4 Nm.
Note: The cutters should only be turned in the direction indicated in the manual and should only be inserted in the correct position shown in the manual. Cutting is not possible with an incorrectly inserted cutter.
Please refer to the manual for more detailed instructions and illustrations.
Add New Comment