User Manual Q&AAnswer
Feb 11, 2025 - 10:36 PM
To install the Sharkoon 4-Port USB 3.2 Gen 1 Aluminium Hub, follow these steps:
1. Make sure your computer is powered off.
2. Connect the USB 3.2 Gen 1 Adapter (Type-A Port to Type-C Plug) to the Type-A port on the hub.
3. Connect the Type-C plug of the USB 3.2 Gen 1 Adapter to the Type-C port on your computer.
4. Connect the USB 3.2 Gen 1 (Type-A Plug) of the hub to an available USB 3.2 Gen 1 (Type-A Port) on your computer.
5. Once all the connections are made, power on your computer.
The hub should now be installed and ready to use. You can connect up to four USB 3.2 Gen 1 devices to the hub's Type-A ports.
Please note that the installation process may vary slightly depending on your computer's operating system and hardware configuration. If you encounter any issues during installation, refer to the user manual for troubleshooting steps or contact Sharkoon customer support for further assistance.
Add New Comment