User Manual Q&AAnswer
Feb 11, 2025 - 10:03 PM
Installation and Usage Instructions for Light Widow FRSLV1 Filter Reading Matte Box System:
1. Mounting the Matte Box:
- Attach the matte box to your camera rig using the provided mounting bracket or compatible mounting system.
- Ensure that the matte box is securely fastened to prevent any movement during operation.
2. Attaching Filters:
- Open the filter tray by sliding it out from the matte box.
- Insert the desired filter(s) into the filter tray, making sure they are properly aligned.
- Close the filter tray by sliding it back into the matte box until it locks in place.
3. Adjusting the Matte Box:
- Use the side knobs or adjustment screws on the matte box to adjust the height and angle of the matte box.
- Align the matte box with the camera lens to ensure proper coverage and prevent any light leaks.
4. Using the Filter Reading Function:
- The Light Widow FRSLV1 features a filter reading function that allows you to see the filter's information without removing it from the matte box.
- To use this function, press the designated button or switch on the matte box to activate the filter reading mode.
- The filter information will be displayed on the built-in screen or through a connected device, depending on the model.
- Use the provided manual or consult the manufacturer's website for specific instructions on using the filter reading function.
5. FCC Compliance:
- The Light Widow FRSLV1 Filter Reading Matte Box System complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference.
- If you experience interference with radio or television reception, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to a different circuit than the receiver.
- Consult a dealer or experienced radio/TV technician for assistance.
6. FCC Radiation Exposure:
- The equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.
- Do not co-locate or operate the transmitter in conjunction with any other antenna or transmitter.
Please refer to the Light Widow FRSLV1 Filter Reading Matte Box System User Manual for more detailed instructions and safety information.
Add New Comment