User Manual Q&AAnswer
Feb 11, 2025 - 09:33 PM
To operate the LifeSmart 600w Personal Heater with Built-In UV LED Light, follow these steps:
1. Plug the heater into a power outlet using the 2-prong power cord.
2. Turn on the heater by flipping the On/Off switch located on the unit.
3. The power light indicator will illuminate, indicating that the heater is turned on.
4. Select the desired heat setting by using the 2Heat setting switch. You can choose between 400 watts or 600 watts.
5. If you only want to use the fan mode without heat, select the fan-only mode.
6. The heater also features a 90-degree oscillating base, which can be turned on by using the oscillating switch.
7. The heater is equipped with safety features such as an overheat safety switch and a tip-over safety switch. In case of overheating or if the heater is accidentally tipped over, these switches will automatically turn off the heater for safety reasons.
8. When you are done using the heater, turn it off by flipping the On/Off switch to the off position.
Please refer to the user guide for more detailed instructions and safety precautions.
Add New Comment