User Manual Q&AAnswer
Feb 11, 2025 - 09:08 PM
The Paulmann 952.71 URail LED Rail Spot Circle Individual Spot Light allows for the replacement of either the light source or the operating device, depending on the specific situation. Here are the steps to replace them:
1. Determine the replaceability level: Refer to the symbols provided on the product or visit the website www.paulmann.com/symbols to identify the specific replaceability level for your luminaire.
2. If the light source or operating device is labeled as replaceable by end users (symbol 1 or 4): You can replace it yourself without permanently damaging the luminaire. Follow these steps:
a. Ensure the luminaire is turned off and unplugged from the power source.
b. Remove any covers or protective elements that may be present.
c. Carefully remove the old light source or operating device by following the instructions provided in the manual.
d. Insert the new light source or operating device, ensuring it is securely in place.
e. Reassemble any covers or protective elements that were removed.
f. Plug the luminaire back into the power source and turn it on to test the replacement.
3. If the light source or operating device is labeled as replaceable by a qualified electrician (symbol 2 or 5): You will need to hire a qualified electrician to perform the replacement. They have the necessary skills and knowledge to safely handle electrical components. Contact a professional to ensure the replacement is done correctly and safely.
4. If the light source or operating device is labeled as not replaceable (symbol 3 or 6): Unfortunately, in this case, the entire luminaire will need to be replaced. The light source or operating device cannot be replaced separately.
Always refer to the instruction manual provided with the product for specific details and safety precautions when replacing any components.
Add New Comment