User Manual Q&AAnswer
Feb 11, 2025 - 09:07 PM
To install the RH-R06-36 36 Inch 900 CFM Ducted Under Cabinet Range Hood, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Before installation, make sure to turn off the power to the range hood at the circuit breaker.
2. Determine the desired location for the range hood. It should be installed at least 24 inches above the cooking surface.
3. If your model has a rear vent, remove the knockout plate from the rear of the range hood using pliers or a screwdriver. If your model has a top vent, remove the knockout plate from the top of the range hood.
4. Attach the rectangular duct to the range hood using the included screws and duct connectors. Make sure the duct is securely fastened.
5. If your model has a rear vent, connect the duct to the wall or roof vent using appropriate ductwork. If your model has a top vent, connect the duct to the ceiling or wall vent.
6. Install the range hood under the cabinet using the provided screws. Make sure it is level and securely attached.
7. Connect the electrical wiring. Follow the wiring diagram in the user manual and ensure all connections are secure.
8. Turn on the power at the circuit breaker and test the range hood to ensure it is functioning properly.
Please note that these instructions are a general guide. For specific details and illustrations, refer to the user manual provided with your RH-R06-36 36 Inch 900 CFM Ducted Under Cabinet Range Hood.
Add New Comment