User Manual Q&AAnswer
Feb 11, 2025 - 09:05 PM
According to the instruction manual, the replaceability of the light source or operating device in the Paulmann 930.79 LED Module Recessed Light depends on the specific model. Please refer to the symbols provided on the website www.paulmann.com/symbols or consult the energy efficiency class mentioned on the product for more information.
If the light source or operating device is labeled with symbol (1) or (4), it means that end users can replace them without permanently damaging the luminaire. In this case, you can follow the instructions below:
1. Make sure the light is turned off and the power supply is disconnected.
2. Locate the light source or operating device that needs to be replaced.
3. Depending on the specific model, you may need to remove a cover or access panel to gain access to the light source or operating device.
4. Carefully remove the old light source or operating device by following the manufacturer's instructions.
5. Install the new light source or operating device by following the manufacturer's instructions.
6. Replace any covers or access panels that were removed.
7. Reconnect the power supply and turn on the light to test if the replacement was successful.
If the light source or operating device is labeled with symbol (2) or (5), it means that a qualified electrician is required to replace them without permanently damaging the luminaire. In this case, it is recommended to seek professional assistance to ensure proper installation and safety.
If the light source or operating device is labeled with symbol (3) or (6), it means that they are not replaceable, and the entire luminaire must be replaced if they become faulty.
Please note that the above instructions are general guidelines, and it is important to consult the specific instruction manual for your Paulmann 930.79 LED Module Recessed Light model for accurate and detailed information on replacing the light source or operating device.
Add New Comment