How do I install the CARRO P-M4006011A1 Bristol 60 Watt Integrated LED Matte Black Pendant? (CARRO P-M4006011A1 LED Black Pendant Instruction Manual)

Answer

manuals.plus

Feb 11, 2025 - 08:55 PM

Installation of the CARRO P-M4006011A1 Bristol 60 Watt Integrated LED Matte Black Pendant should be carried out by a competent person. Before starting the installation, make sure to disconnect the mains cable from the power supply by removing the fuse or turning the switch to the "OFF" position.

Here are the steps to follow for installation:

1. Ensure that the surface where you are attaching the pendant is not damp, freshly painted, or electrically conductive.

2. Use a suspension system that can support the weight of the pendant.

3. Always use the correct type of bulb as indicated on the label.

4. When cleaning the pendant, limit it to the outer surfaces, shades or protective glass, reflectors, and covers.

5. Avoid touching the bulb with bare hands. Switch off the electricity supply and allow the bulb to cool for 10 minutes before changing it.

If the pendant has crystal or glass components, follow these additional steps:

1. Check the packed bags with numbers and open them.

2. Hang the crystals in the correct places according to the provided illustration.

Important Notes:

- If the lamp has an earth terminal symbol ( ), the earth wire (yellow and green) must be connected to the indicated terminal.

- If the lamp has the "Protection class II" symbol, it means it is doubly insulated and does not require an earth wire connection.

- The symbol ( ) indicates that the lamp head must be at least 0.5m away from the lighted surface.

- The symbol ( ) indicates that the luminaire is suitable for use on normally flammable surfaces.

- The symbol ( ) indicates that the luminaire is only suitable for indoor use.

For specific instructions on how to connect the fitting wire to the household circuit, please refer to the manual or consult a qualified electrician.

Please note that this answer is based on the information provided in the instruction manual for the CARRO P-M4006011A1 Bristol 60 Watt Integrated LED Matte Black Pendant. It is always recommended to refer to the manual for accurate and detailed instructions specific to your product.