User Manual Q&AAnswer
Feb 11, 2025 - 08:37 PM
To adjust the beater to bowl clearance on the KitchenAid KSM180LELB Stand Mixer, follow these steps:
1. Tilt back and lock the Motor Head in the raised position.
2. Locate the Beater Height Adjustment xxxx , which is located on the side of the Stand Mixer near the attachment hub.
3. Turn the xxxx slightly counterclockwise (left) to raise the beater or clockwise (right) to lower it.
4. Adjust the xxxx in small increments until the beater no longer hits the bowl while mixing.
5. Test the adjustment by unlocking the Motor Head and attempting to raise it. If the beater height is correctly adjusted, the Motor Head should not raise easily.
6. If you over adjust the xxxx and the locking lever does not lock into place, readjust the xxxx to find the correct clearance.
Please refer to the "Product Assembly" section of the KitchenAid KSM180LELB Stand Mixer User Manual for visual instructions on adjusting the beater to bowl clearance.
Add New Comment