Answer

Feb 11, 2025 - 08:28 PM
To properly install the Crosby G-460 Soft Eye Bundle Clip, follow these steps:
1. Before installing the Bundle Clip, apply the initial load by lifting the bundle and clearing the support, producing a tight choke. Repeat this step as necessary until the bundle package is in the most compact position.
2. After the initial loading, install the Bundle Clip in the proper orientation, with the curved portion (Bundle Clip tip) over the eye of the sling.
3. Insert the U-bolt through the Bundle Clip.
4. Properly position the clip base over the U-bolt and install the nuts. Use a torque wrench to tighten the nuts evenly, alternating from one nut to the other until the curved portion bottoms out on the clip base, and the recommended torque is reached. Refer to Table 1 in the manual for the recommended torque value.
5. Before each lift, check to ensure that the choking eye has not slipped from the Bundle Clip tip. Repeat Step 3 if necessary.
It is important to read and understand the complete instruction manual for the Crosby G-460 Soft Eye Bundle Clip before using it to ensure proper installation and safe usage.
Add New Comment