User Manual Q&AAnswer
Feb 11, 2025 - 08:18 PM
To install the ENDORFY Fera 5 Dual Fan EY3A006 CPU Cooler on your AMD processor, please follow the steps below:
1. Before starting the installation, make sure your computer is turned off and unplugged from the power source.
2. Remove the existing CPU cooler from your AMD processor by gently twisting it and lifting it off.
3. Clean the surface of the processor using a lint-free cloth or alcohol pad to remove any thermal paste residue.
4. Take the ENDORFY Fera 5 Dual Fan EY3A006 CPU Cooler and locate the AMD mounting bracket. Attach the mounting bracket to the cooler base by aligning the holes and securing it with the provided screws.
5. Apply a small amount of thermal paste onto the center of the processor. Spread it evenly using a plastic card or thermal paste applicator.
6. Carefully place the cooler onto the processor, aligning the mounting holes on the cooler with the mounting holes on the motherboard.
7. Insert the provided screws through the mounting holes on the cooler and tighten them diagonally in a cross pattern until they are securely fastened. Be careful not to overtighten the screws.
8. Connect the cooler's fan cables to the CPU fan header on the motherboard.
9. Double-check all connections and ensure that the cooler is securely installed.
10. Close the computer case and reconnect all cables.
11. Turn on your computer and check the CPU temperature in your BIOS or using monitoring software to ensure proper cooling.
Please note that this is a general guide, and it is important to refer to the specific instructions provided in the ENDORFY Fera 5 Dual Fan EY3A006 CPU Cooler User Manual for detailed installation steps and any additional precautions.
Add New Comment