User Manual Q&AAnswer
Feb 11, 2025 - 08:12 PM
To install the ENDORFY Fera 5 EY3A005 CPU Cooler on an AMD processor, please follow the steps below:
1. Ensure that your computer is powered off and unplugged from the power source.
2. Remove the existing CPU cooler from your AMD processor, if applicable.
3. Apply a small amount of thermal paste onto the center of the AMD processor. Spread it evenly using a plastic card or a similar tool.
4. Place the ENDORFY Fera 5 EY3A005 CPU Cooler onto the AMD processor, aligning the mounting holes on the cooler with the corresponding holes on the motherboard.
5. Insert the provided screws through the mounting holes on the cooler and tighten them using a screwdriver. Ensure that the cooler is securely attached to the motherboard.
6. Connect the fan cable from the CPU cooler to the CPU fan header on the motherboard.
7. Double-check all connections and ensure that there is no interference between the cooling system and other components on the motherboard.
8. Close the computer case and reconnect all necessary cables.
9. Power on your computer and check the CPU temperature in your system's BIOS or through software monitoring tools to ensure proper cooling.
Please refer to the ENDORFY Fera 5 EY3A005 CPU Cooler user manual for more detailed instructions and illustrations specific to your AMD processor model.
Add New Comment