User Manual Q&AAnswer
Feb 11, 2025 - 05:33 AM
To connect the CREALITY CR-Scan Lizard 3D Scanner to your computer, follow these steps:
1. Plug one end of the device cable into the navigation plug of the scanner.
2. Plug the other end of the device cable into the power cord and your computer's USB 2.0 or above port.
3. Make sure to align the airline plug of the device cable with the notch of the device jack.
4. To unplug the cable, press and hold the position shown in the figure in the manual and pull out the cable directly.
Additionally, if you have a turntable for the scanner, you can connect its power cord to the computer through a USB power supply or use a phone charger for its power supply.
Please refer to the CREALITY CR-Scan Lizard 3D Scanner User Manual for more detailed instructions and illustrations.
Add New Comment