User Manual Q&AAnswer
Feb 11, 2025 - 05:29 AM
To install the casters on the HP MC83 Slide Top Microcut Shredder, follow these steps:
1. Lay the shredder on its back.
2. Locate the four holes in each corner on the bottom of the shredder.
3. Insert the long post of each caster into the corresponding hole.
4. Push each caster firmly until you hear or feel it snap and lock into place.
5. Carefully lift the shredder back into an upright position.
6. Ensure that all four casters are securely in place and that the shredder stands evenly on the floor.
Please refer to the user manual for visual instructions and additional safety precautions.
Add New Comment