User Manual Q&AAnswer
Feb 11, 2025 - 05:27 AM
To install the casters on the HP MC145 Slide Top Microcut Shredder, follow these steps:
1. Carefully lay the shredder on its back.
2. Locate the four holes in each corner on the bottom of the shredder.
3. Insert the long post of each caster into the corresponding hole.
4. Push each caster firmly until you hear or feel it snap and lock into place.
5. Once all four casters are installed, carefully lift the shredder back into an upright position.
6. Ensure that the shredder stands evenly on all four casters and that they fit squarely on the floor.
Please refer to the user manual for visual instructions and additional information on setting up the HP MC145 Slide Top Microcut Shredder.
Add New Comment