User Manual Q&AAnswer
Feb 11, 2025 - 05:24 AM
To install the casters on the , follow these steps:
1. Carefully lay the shredder on its back.
2. Locate the four holes in each corner on the bottom of the shredder.
3. Insert the long post of each caster into the corresponding hole.
4. Push each caster firmly until you hear or feel it snap and lock into place.
5. Once all four casters are installed, carefully lift the shredder back into an upright position.
6. Ensure that the shredder stands evenly and that all four casters fit squarely on the floor.
Please refer to the user manual for visual instructions and additional information.
Add New Comment