User Manual Q&AAnswer
Feb 11, 2025 - 05:16 AM
To install the casters on the HP CC12 Slide Shredder, follow these steps:
1. Carefully lay the shredder on its back.
2. Locate the four holes located in each corner on the bottom of the shredder.
3. Insert the long post of each caster into the corresponding hole.
4. Push each caster into place until you hear or feel it snap and lock into place.
5. Place the shredder in an upright position and ensure that all four casters fit squarely on the floor.
Please refer to the "Setup" section in the user manual for more detailed instructions and illustrations.
Add New Comment