User Manual Q&AAnswer
Feb 11, 2025 - 04:23 AM
To set the DMX address for the ACME Stage Blinder IP, follow these steps:
1. Press the MENU button on the rear panel of the fixture until the DMX 512 Address Setting option is displayed on the screen.
2. Press the ENTER button to select the DMX 512 Address Setting option. The display will start blinking.
3. Use the DOWN and UP buttons to change the DMX address from 001 to 512.
4. Once the desired address is selected, press the ENTER button to set the address. The fixture will now respond to the new DMX address.
Note: The DMX address should be set according to the DMX universe and channel configuration of your DMX controller.
For more information and detailed instructions, please refer to the ACME Stage Blinder IP User Manual.
Add New Comment