User Manual Q&AAnswer
Feb 11, 2025 - 03:59 AM
Lubricating the treadmill is an important maintenance task that helps ensure smooth and efficient operation. Here are the step-by-step instructions on how to properly lubricate the Sunny Health Fitness SF-T7705 treadmill:
1. Before starting, make sure the treadmill is turned off and unplugged from the electrical outlet for safety.
2. Locate the lubricant bottle that came with the treadmill. If you don't have the lubricant bottle, you can purchase treadmill lubricant from a fitness equipment store or online.
3. Lift one side of the running belt to expose the running board underneath. Apply a small amount of lubricant to the middle of the running board. Use a clean cloth or applicator to spread the lubricant evenly over the entire surface of the running board.
4. Repeat the process for the other side of the running belt, lifting it and applying lubricant to the middle of the running board.
5. Once both sides of the running board are lubricated, turn on the treadmill and let it run at a slow speed (around 1-2 mph) for a few minutes to allow the lubricant to distribute evenly.
6. After a few minutes of running, check the running belt to ensure it is moving smoothly. If necessary, apply a small amount of additional lubricant to any areas that are still sticking or not moving smoothly.
7. Wipe off any excess lubricant from the running board and running belt using a clean cloth.
8. Finally, perform a visual inspection of the treadmill to ensure that all parts are properly aligned and functioning correctly.
By following these steps, you should be able to properly lubricate your Sunny Health Fitness SF-T7705 treadmill and restore smooth and efficient operation. If you have any further questions or concerns, please refer to the user manual or contact Sunny Health Fitness customer support for assistance.
Add New Comment