User Manual Q&AAnswer
Feb 11, 2025 - 03:56 AM
To assemble the Pinolino 14 00 61 G Wardrobe Light, please follow these steps:
1. Make sure you have all the parts and carefully study the illustrations in the assembly plan before starting the assembly.
2. Set up the article on an even, flat surface. It is recommended to use the packaging of the article as underlay to protect the article and the floor.
3. Begin assembling the parts in numerical order, ensuring that all dowels are inserted in the correct position. Note that all dowels should be advanced in the deeper hole up to the marking.
4. Before screwing the back panel, make sure that the wardrobe is assembled at a right angle.
5. Adjust the door by following the instructions provided in the manual. Please note that the door set screws are not included in the delivery.
6. Regularly check that the screws are well tightened and ensure that the wardrobe is standing against the wall for stability.
Please remember to use only the enclosed hex key and a screwdriver for the assembly. Do not use an electric screwdriver to avoid damaging the product.
For any service cases or warranty claims, mark the respective part clearly in the assembly plan and fill out the Customer Service contact form available on the Pinolino website. Include a copy of the receipt, the assembly plan, and the filled-in contact form with the serial number specified. Without these documents, complaints may not be considered.
It is important to follow the safety requirements mentioned in the manual, such as avoiding open fires or strong heat sources near the wardrobe and keeping synthetic bags or elements out of the reach of children.
For further maintenance, wipe the wardrobe with a clean, wet cloth. More details can be found on the Pinolino website.
Please note that the assembly must be carried out by two adults for safety reasons.
If you have any additional questions or concerns, please refer to the provided assembly plan or contact Pinolino's Customer Service.
Add New Comment