User Manual Q&AAnswer
Feb 11, 2025 - 03:40 AM
To install the Midea 360484 washing machine, follow these steps:
1. Select a rigid, dry, and level surface for the machine.
2. Avoid placing the machine in direct sunlight and ensure there is sufficient ventilation.
3. The room temperature should be above 0℃ and the machine should be kept far away from heat sources such as coal or gas.
4. Unpack the washing machine, remove the base packing, and remove the tape securing the power supply cord and drain hose.
5. Remove the transport bolts from the backside of the machine. Loosen the bolts with a spanner, remove them, and stop the holes with transport hole plugs. Keep the transport bolts for future use.
6. Level the washing machine by ensuring the lock nuts on all four feet are screwed tightly against the housing. Adjust the legs and lock them with a spanner to make sure the machine is steady.
7. Connect the water supply hose by screwing it tightly clockwise to the inlet valve at the backside of the machine. Make sure not to kink, crush, modify, or sever the water inlet hose.
8. Position the drain hose properly, either by putting it into a water trough or connecting it to the branch drain pipe of the trough. Make sure not to kink or protract the drain hose.
9. Once the installation is complete, plug in the machine and turn on the water supply.
For more detailed instructions and illustrations, please refer to the Midea 360484 Washing Machine User Manual.
Add New Comment