User Manual Q&AAnswer
Feb 11, 2025 - 03:34 AM
To check the fluid level in the MOTORVAC 500-0175 Cool Smoke MP Multi-Pressure Leak Diagnostics System, follow these steps:
1. Locate the Cool Smoke Fluid Dipstick on the unit.
2. Insert the dipstick into the fluid reservoir until the threads touch the fluid.
3. Remove the dipstick and read the fluid level indicated on the dipstick.
4. Ensure that the fluid level is not above the maximum fill line indicated on the dipstick. Do not overfill the unit.
It is important to use only Cool Smoke Fluid in the Cool Smoke MP system. Altering the fluid or using any other replacement parts may cause machine malfunction, damage to the vehicle, or personal injury.
Add New Comment