How do I assemble the AL-KO LSH 6 log splitter? (AL-KO LSH 4 LSH 6 Log Splitter Instruction Manual)

Answer

manuals.plus

Feb 11, 2025 - 03:03 AM


To assemble the AL-KO LSH 6 log splitter, follow these steps:

1. Remove the wheels: Pull off the protective caps on the shaft and remove the C-clips. Then, pull off the wheels from the shaft.

2. Remove the pedestal: Unscrew the four nuts on the inside of the pedestal and pull out the carriage bolts. Remove the pedestal from the log splitter.

3. Assemble the base: Push the longitudinal strut through the cross-strut, ensuring that it protrudes by approximately 10 cm at the other end. Insert the free end of the longitudinal strut into the front leg and secure the connection with a hexagon bolt. Push the wheels onto both shafts of the cross-strut and secure them with C-clips. Finally, pull the protective caps onto both shafts.

4. Mount the log splitter on the base: Push both rear legs onto the shaft of the log splitter and secure them with hexagon bolts and nuts. Stand the log splitter on the base by inserting the rear legs into the recesses in the cross-strut. Push the recess in the pedestal onto the front leg and secure the connection with hexagon bolts and nuts. Finally, secure the connection of the cross-strut to the longitudinal strut with a hexagon bolt.

Make sure to follow these assembly instructions carefully to ensure proper operation and safety. For more detailed instructions and illustrations, refer to the AL-KO LSH 4, LSH 6 Log Splitter Instruction Manual.