User Manual Q&AAnswer
Feb 11, 2025 - 03:00 AM
To adjust the temperature of the hot water on your ARISTON Electric Water Heater, follow these steps:
1. Make sure the appliance is switched on and connected to the power supply.
2. Locate the temperature control buttons on the user interface panel of your water heater. The buttons may be labeled as "+" and "-".
3. Press the "+" button to increase the temperature or the "-" button to decrease the temperature. The temperature range is typically between 40°C and 80°C.
4. Observe the LED indicators on the user interface panel. The LEDs will indicate the temperature reached by the water. The LEDs between the last steady one and the one related to the set temperature will flash progressively.
5. If the temperature drops, for example due to water being drawn, the heating will automatically reactivate and the flashing LEDs will start progressing again.
Please note that adjusting the temperature of the hot water should be done with caution to prevent scalding or burns. It is recommended to set the temperature at a safe level, especially if there are children, disabled persons, or elderly individuals using the hot water.
For more detailed instructions and safety precautions, please refer to the ARISTON Electric Water Heaters Instruction Manual provided with your appliance.
Add New Comment