User Manual Q&AAnswer
Feb 11, 2025 - 02:40 AM
To connect your Optoma ZW350 projector to external devices, follow these steps:
1. Check the available input connections on the projector. The ZW350 has two HDMI 1.4a inputs with 3D support, one VGA input (YPbPr/RGB), and an audio 3.5mm input.
2. For HDMI connections, use HDMI cables to connect your source device (such as a laptop, Blu-ray player, or gaming console) to the HDMI input on the projector. Make sure to use HDMI 1.4a cables for 3D support.
3. For VGA connections, use a VGA cable to connect your source device to the VGA input on the projector. Additionally, connect the audio output of your source device to the audio 3.5mm input on the projector if you want to hear audio through the projector's built-in speaker.
4. If you need to control the projector remotely or monitor it over a network, you can use the RJ45 LAN connection. Connect an Ethernet cable from the projector's RJ45 LAN port to your network router or switch.
5. If you have any other control or service needs, you can use the R$232, micro USB service, or USB-A power 1.5A connections as required.
6. Once all the connections are made, power on your source device and the projector. Use the projector's remote control or the control buttons on the projector to select the appropriate input source.
7. You should now see the content from your external device displayed on the Optoma ZW350 projector.
For more detailed instructions and illustrations, please refer to the User Manual provided with the projector.
Add New Comment