User Manual Q&AAnswer
Feb 11, 2025 - 02:23 AM
To program the user button and RGB LED on the Kontron nRF52840 USB Dongle Kit, you can follow the instructions provided in the user manual. Here is a step-by-step guide:
1. Connect the USB dongle to your computer using a USB cable.
2. Ensure that the USB dongle is recognized by your computer and the necessary drivers are installed.
3. Open your preferred development environment or programming tool that supports the nRF52840 SoC.
4. Load the appropriate firmware or code example for controlling the user button and RGB LED onto the USB dongle.
5. Modify the code to define the desired behavior for the user button and RGB LED.
6. Compile the code and flash it onto the USB dongle.
7. Disconnect the USB dongle from your computer and power it using an external power source if required.
8. Test the functionality of the user button and RGB LED by interacting with the button and observing the LED's behavior.
For more detailed instructions and code examples, please refer to the "Programming the User Button and RGB LED" section in the user manual of the Kontron nRF52840 USB Dongle Kit.
Add New Comment