User Manual Q&AAnswer
Feb 11, 2025 - 01:36 AM
To charge the Automoving Light battery, follow these steps:
1. Use the provided battery charger kit to fully charge the Automoving Light Battery before first use. The charging time for an empty battery is up to 2 hours.
2. Connect the Automoving Light Battery to the Battery charger adapter.
3. Slide the battery forward to connect it to the Battery charger adapter. Make sure the battery is mounted securely and that the battery latch has clicked into place.
4. Connect the AC power adapter to the Battery charger adapter.
5. Connect the AC power adapter to a power source (100-240 V, 50/60 Hz).
6. The AC power adapter will display a red LED light when charging. The strobe on the battery will flash while charging.
7. The Automoving Light battery is fully charged when the green LED light is turned on.
8. Disconnect the AC power adapter from the power source and disconnect the Battery charger adapter from the Automoving Light Battery when the battery is fully charged.
Note: Do not charge an Automoving Light Battery immediately after flight as the temperature may be too high. Wait until the battery cools down to room temperature before charging again. The ideal charging temperature is 22o to 28o C (71.6o to 82.4o F).
Add New Comment