User Manual Q&AAnswer
Feb 11, 2025 - 01:17 AM
To install the RIZOMA Yamaha MT-07 headlight fairing, please follow the steps below:
1. Before you start, make sure your motorbike is standing firmly to avoid any accidents or damage.
2. Remove the original screws from the headlight fairing.
3. Install the brackets provided with the RIZOMA headlight fairing kit.
4. Carefully install the headlight fairing onto the brackets.
5. Important: Remove the film protection from the windshield only after the installation.
6. Pay attention to not excessively tighten the M5X16 screws, as it may compromise the integrity of the rubber nuts.
7. Once the fairing is securely installed, you can apply the RIZOMA sticker. Before applying the sticker, clean and degrease the contact surface.
8. After installation, check that all related components of the motorbike, such as brakes, throttle, clutch, lights, and steering, function properly.
9. It is recommended to periodically check the tightness of the screws and perform maintenance on your RIZOMA products.
Please note that this answer is based on the information provided in the RIZOMA Yamaha MT-07 User Manual. For further assistance or clarification, it is recommended to consult the manual or contact an authorized RIZOMA dealer.
Add New Comment