User Manual Q&AAnswer
Feb 11, 2025 - 12:13 AM
To fill the reservoir of the Russell Hobbs 24420-56 Steam Power Steam Generator Iron, follow these steps:
1. Remove the reservoir by pulling it away from the body of the steam generator using the grip on the front of the reservoir.
2. Fill the reservoir with water up to the max mark. Do not exceed the max mark.
3. Refit the reservoir into the base unit.
Note: You may use tap water, but if you live in a hard water area, it is recommended to use distilled water. If using distilled water, make sure it is suitable for use in irons.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment