User Manual Q&AAnswer
Feb 11, 2025 - 12:00 AM
To set the DMX address for the , follow these steps:
1. Press the MENU button on the control panel until the DMX Address is displayed.
2. Press the ENTER button to enter the DMX Address setting.
3. Use the UP/DOWN buttons to adjust the address from 001 to 512.
4. Press the ENTER button to confirm and store the DMX address.
5. Press the MENU button to go back to the previous menu or wait for one minute to exit the menu mode.
Note: Each lighting fixture needs to have a unique DMX address to receive the data sent by the controller. The address number can be between 0-511 (usually 0 and 1 are equal to 1). Refer to the manual for more information on addressing multiple units.
Please refer to the "DMX Address Setting" section in the user manual for more detailed instructions and illustrations.
Add New Comment