User Manual Q&AAnswer
Feb 10, 2025 - 11:59 PM
To assemble the Ottobock 17KL19 Duchenne Bow Kit, please follow these steps:
1. Place the red washer on the bearing bushing.
2. Guide the joint xxxx through the bearing bushing.
3. Guide the joint xxxx with the bearing bushing through the bow and the washer and attach it to the orthotic joint.
4. Bend the bows.
5. Connect the bows to each other, ensuring that the two orthotic joints are aligned parallel to one another.
6. Check the locking function and adjust if necessary.
Please note that these assembly instructions are a summary and it is important to refer to the detailed instructions provided in the Ottobock 17KL19 Duchenne Bow Kit Instruction Manual for proper assembly and usage.
(Source: Ottobock 17KL19 Duchenne Bow Kit Instruction Manual)
Add New Comment