User Manual Q&AAnswer
Feb 10, 2025 - 11:11 PM
Before assembling the IBEX 10008347 Crash Bar Kit, it is important to follow the preparation steps outlined in the instruction manual. Here are the recommended preparation steps:
1. Read the assembly instructions carefully and ensure that you have all the parts listed in the manual.
2. Make sure your vehicle is securely supported and cannot fall over during the assembly process.
3. Turn off the engine and remove the ignition key. If necessary, allow the engine and exhaust to cool down.
4. When working on the electrics, disconnect the vehicle battery.
5. Use suitable tools for the assembly. If needed, seek assistance from a second person.
6. According to the vehicle manufacturer's specifications, all demounted parts and connections must be reassembled or replaced with the parts and connections provided by IBEX.
7. Unless stated otherwise, secure all threads with a medium-strong liquid xxxx protection.
8. Tighten all bolts and nuts according to A4/ISO standards, unless specified differently by the vehicle manufacturer or IBEX.
9. After assembly, double-check that all previously demounted parts and connections have been properly remounted.
By following these preparation steps, you can ensure a safe and successful assembly of the IBEX 10008347 Crash Bar Kit.
Add New Comment